Dollhouse upcycle project: Making 1:12 scale fancy bowls from discarded plastic spout rings

With a little effort and a few items, you can make these lovely porcelain-look bowls for your dollhouse. They will add such a realistic designer touch to a miniature China hutch, plate rail or dining room table.

What you will need:

• Images of China plate patterns shrunk down to 1″ in diameter and printed on regular printer paper. The kind that has an outer boarder and center circle design with a band of white between them, not a pattern all-over
• White or cream colored acrylic paint and a small paintbrush
• Plastic ring tabs that are removed from a cardboard carton of coffee creamer or similar container
• Sharp scissors for small detail work
• Craft blade (optional)
• White or tacky glue
• Sandpaper or emery board
• 1″ & 3/4″ circle hole punches (optional, but nice to have)
• Gloss mod podge or clear glaze

First you need to prep the plastic rings by cutting the “bowl” part away from the ring. Carefully use a craft blade if you don’t want to dull your good scissors. Cut as close to the rim of the bowl as you can and then sand smooth any remaining bump left. If your plastic doo-hickey is like mine, there may be raised numbers on the bottom but these won’t show when you are done. You can try to sand them down too if they bother you. Then set the bowl level on your sandpaper or emery board and sand a flat spot on the base, so you bowl will sit level.

Next paint your bowl white or cream (whichever looks best with the plate pattern you have chosen). Give it 2 – 3 coats on the bottom and top, letting dry on each side before turning to paint the other.

Now use your 3/4″ circle punch or scissors to carefully cut between the outer China plate pattern boarder and the center round pattern. Trim the center round pieces up to the pattern and set them aside for now. Use a 1″ circle punch to cut out the outer boarder patterns, or cut freehand with scissors, and trim the inner edge of the border up to the pattern. If you understood my explanation you should be left with outer circle shapes of the pattern with empty centers and inner circle shapes of the pattern. These will be glued to the painted plastic bowls. If you try to glue them without cutting the center and outer patterns apart and removing the white space between, you will end up with wrinkles, which you don’t want.

Spread a thin layer of glue on the back side of the center plate pattern and press it in the center of the bottom of the bowl. You will have a little time to move it slightly until it looks centered. Press it evenly into the curved shape in the bottom being careful to not make any wrinkles. Spread a thin layer of glue onto the back of the outer plate pattern ring and press it onto the rim of the bowl. The rim may not be exactly round, so eyeball the pattern ring up until it looks evenly spaced around the center pattern. This means it may hang slightly over the side of the plastic bowl in some spots. You can fill this underneath ridge in with gloss mod podge or clear glaze at the end so don’t worry about it. It’s much better to get it all centered correctly than to match the edges of the bowl, because you will mostly be looking at the front of the bowl, not the underside.

When you pattern is dry you can seal the whole dish with gloss mod podge or glaze using several coats on the bottom and top, leaving it just a little thicker on the underneath edges that are hanging over the bowl to even it up. Paint 2 – 3 coats on the bottom and top, letting dry on each side before turning to paint the other.

Make a whole set of matching bowls or make different coordinating patterns to go on a shelf together. You might want to make matching plates to go with the bowls. When making plates you won’t need to worry about wrinkles, so you don’t have to cut the centers out, just use something that is 1″/25mm across as a base. I haven’t tried it, but I have heard that you can make miniature plates out of the base of egg carton cups, so do a search on that technique if your goal is to upcycle (aka turn trash into treasure). And I think that is a very worthy goal, which is why I wrote this tutorial to begin with.

Have fun with it, improve on it and keep nurturing your tiny obsession, my friends!